CAPB-101 - page 6

INLET/OUTLET SCREENS
Spiral welded steel screenwith zinc,
clear chromate finishmounts over the
standard slip fit inlet or outlet. Screens
are strongly recommended for installa-
tions with unducted inlets or outlets.
INLET FILTER
Efficient inlet filters are available as
either a disposable paper type or as a
cleanable, reusablewiremesh. The
cannister has a flanged base for
mounting to a flanged inlet.
6
FLANGED INLETS/OUTLETS
Cast aluminumflangesmount to
either inlet or outlet. Inlet flange
holes are on centerline. Outlet
flange holes straddle centerline.
HOUSINGDRAIN
To facilitate cleanout, a 1/2" drain
with plug is located in the lowest
point of the housing.
VIBRATION ISOLATORS
Rubber-In-Shear (RIS) isolators with
steel mounting platemolded in
are available for vibration sensitive
installations. They provide 1/4" static
deflection.
SLIDE GATE DAMPERS
Dampers allowmanual adjust of
air volume to suit the application.
Housings are cast aluminumwith a
galvanized steel gate and screwlock
to hold gate firmly in place. Dampers
are available for inlet or outlet in
either full cutoff stylemounted on
the housing, or half cutoff style that
mounts to ductwork.
OPTIONAL ACCESSORIES
Half cut-off slide gate
damper on a Series 1400
blower with bottom
angular up discharge.
Ductwork not shown.
1,2,3,4,5 7,8,9,10,11,12,13,14,15,...16
Powered by FlippingBook